Regulatory Open Forum

 View Only
  • 1.  IEC 61010 & IEC 62366 checklist

    This message was posted by a user wishing to remain anonymous
    Posted 4 days ago
    This message was posted by a user wishing to remain anonymous

    Hi,

    does anyone have checklists for  IEC 61010 and IEC 62366 that can share.

    Kind Regards.


  • 2.  RE: IEC 61010 & IEC 62366 checklist

    Posted 3 days ago
    You can either ask your test lab for copies of the latest CB scheme checklists (TRFs - Test Report Forms) or you can purchase them thru CB Scheme via the IEC website.

    The IEC 61010-1 most current TRF is at https://www.iecee.org/dyn/www/f?p=106:67:0::::FSP_STD_ID:68849 which will point you at the IEC webstore for that TRF.

    For IEC 62366 there is no CB Scheme TRF (as it is a process life cycle standard and not a type test standard) issued directly but through the IEC 60601-1-6 TRF it references and actually focuses on IEC 62366-1 (instead of IEC 62366) for the most recent TRF.  The TRF can be found at https://www.iecee.org/dyn/www/f?p=106:67:0::::FSP_STD_ID:68076 and then you can go to the IEC webstore to purchase a copy of it.

    If you want to search for older versions of the TRFs or other TRFs go to https://www.iecee.org/dyn/www/f?p=106:61:0::::: and then go to area of the webpage that says "Table search and enter the standard number or the area like "med" or "meas" for Medical (i.e. IEC 60601 series of standards) or Measuring (i.e. IEC 61010 series of standards & more).

    ------------------------------
    Leonard (Leo) Eisner, P.E.
    The "IEC 60601 Guy"
    Principal Consultant, Eisner Safety Consultants
    Mobile: (503) 709-8328
    Email: Leo@EisnerSafety.com
    Website: www.EisnerSafety.com
    ------------------------------



  • 3.  RE: IEC 61010 & IEC 62366 checklist

    This message was posted by a user wishing to remain anonymous
    Posted 2 days ago
    This message was posted by a user wishing to remain anonymous

    Hi Leonard,

    Thank you very much for the useful links above. I don't know about it as this is my first time looking at these standards.

    One more thing that i would appreciate your advice on. We have a contract organization that are manufacturing test reader for us. The reader is an instrument with software that analyses results from cartridge.  What type of testing  should we do to confirm instrument safety? I would need to write a test protocol/ report and send it to the contractor to follow and confirm instrument safety.

    Kind Regards.